1,951 research outputs found
An investigation into the depiction of smart grid technology
Increasing climate change concerns and depletion of fossil fuels demand greater efficiency in electricity production and consumption. Smart Grid is a vision of an enhanced electricity grid that integrates the electric grid with communication and sensing technologies to improve energy delivery. A number of initiatives have been embarked upon to reach this vision. Databases of Smart Grid projects are being kept to hallmark the state of development and advise future project design. However, to date, there is no method of comparing projects‟ results. This means that it is difficult to identify the most successful projects. In addition, details of projects tend to be descriptive and there is no standard method of representing Smart Grid systems. The first Smart Grid technologies are about to be deployed in homes, and yet, there are little research examining how domestic consumers would react to a full set of Smart Grid technology. This is important because the opinions and participation of domestic consumers could lead to the success or failure of the Smart Grid system. This research aims to device a representation system that enables the comparison of smart grid technology available for the residential consumers in the UK. The objectives are to: (i) review and identify existing representations of home Smart Grid technology; (ii) review and identify the general system representation methods; (iii) develop a representation method that maps and enables the comparison of Smart Grid technology in homes; (iv) validate the design of the representation method with relevant stakeholders. Through a four step methodology these objectives were achieved.
Thirty Smart Grid diagrams taken from journals and conference papers were analysed and categorised into five groups based of the type of communication features they contained. The results from this analysis guided the development of a Smart Grid representation method. Two Smart Grid systems that are available on the market were depicted using the representation method and were used to validate the design through interviewing 10 residential electricity consumers. As an outcome, this research had delivered a validated representation method that could be used to depict electricity management systems. It could be adopted by energy companies to convey the functions and benefits of Smart Grid technologies to potential customers
Examining the use of visualisation methods for the design of interactive systems
Human-Computer Interaction (HCI) design has historically involved people from different fields. Designing HCI systems with people of varying background and expertise can bring different perspectives and ideas, but discipline-specific language and design methods can hinder such collaborations. The application of visualisation methods is a way to overcome these challenges, but to date selection tools tend to focus on a facet of HCI design methods and no research has been attempted to assemble a collection of HCI visualisation methods. To fill this gap, this research seeks to establish an inventory of HCI visualisation methods and identify ways of selecting amongst them. Creating the inventory of HCI methods would enable designers to discover and learn about methods that they may not have used before or be familiar with. Categorising the methods provides a structure for new and experienced designers to determine appropriate methods for their design project.
The aim of this research is to support designers in the development of Human-Computer Interaction (HCI) systems through better selection and application of visualisation methods. This is achieved through four phases. In the first phase, three case studies are conducted to investigate the challenges and obstacles that influence the choice of a design approach in the development of HCI systems. The findings from the three case studies helped to form the design requirements for a visualisation methods selection and application guide. In the second phase, the Guide is developed. The third phase aims to evaluate the Guide. The Guide is employed in the development of a serious training game to demonstrate its applicability. In the fourth phase, a user study was designed to evaluate the serious training game. Through the evaluation of the serious training game, the Guide is validated.
This research has contributed to the knowledge surrounding visualisation tools used in the design of interactive systems. The compilation of HCI visualisation methods establishes an inventory of methods for interaction design. The identification of Selection Approaches brings together the ways in which visualisation methods are organised and grouped. By mapping visualisation methods to Selection Approaches, this study has provided a way for practitioners to select a visualisation method to support their design practice. The development of the Selection Guide provided five filters, which helps designers to identify suitable visualisation methods based on the nature of the design challenge. The development of the Application Guide presented the methodology of each visualisation method in a consistent format. This enables the ease of method comparison and to ensure there is comprehensive information for each method. A user study showing the evaluation of a serious training game is presented. Two learning objectives were identified and mapped to Bloom’s Taxonomy to advocate an approach for like-to-like comparison with future studies
The JetCurry Code. I. Reconstructing Three-Dimensional Jet Geometry from Two-Dimensional images
We present a reconstruction of jet geometry models using numerical methods
based on a Markov ChainMonte Carlo (MCMC) and limited memory
Broyden-Fletcher-Goldfarb-Shanno (BFGS) optimized algorithm. Our aim is to
model the three-dimensional geometry of an AGN jet using observations, which
are inherently two-dimensional. Many AGN jets display complex hotspots and
bends over the kiloparsec scales. The structure of these bends in the jets
frame may be quite different than what we see in the sky frame, transformed by
our particular viewing geometry. The knowledge of the intrinsic structure will
be helpful in understanding the appearance of the magnetic field and hence
emission and particle acceleration processes over the length of the jet. We
present the method used, as well as a case study based on a region of the M87
jet.Comment: Submitted to ApJ on Feb 01, 201
Categorisation of visualisation methods to support the design of Human-Computer Interaction systems
During the design of Human-Computer Interaction (HCI) systems, the creation of visual artefacts forms an important part of design. On one hand producing a visual artefact has a number of advantages: it helps designers to externalise their thought and acts as a common language between different stakeholders. On the other hand, if an inappropriate visualisation method is employed it could hinder the design process. To support the design of HCI systems, this paper reviews the categorisation of visualisation methods used in HCI. A keyword search is conducted to identify a) current HCI design methods, b) approaches of selecting these methods. The resulting design methods are filtered to create a list of just visualisation methods. These are then categorised using the approaches identified in (b). As a result 23 HCI visualisation methods are identified and categorised in 5 selection approaches (The Recipient, Primary Purpose, Visual Archetype, Interaction Type, and The Design Process).Innovate UK, EPSRC, Airbus Group Innovation
Recommended from our members
A 2-Question Summative Score Correlates with the Maslach Burnout Inventory
Introduction: There is a high prevalence of burnout among emergency medicine (EM) residents. The Maslach Burnout Inventory - Human Services Survey (MBI-HSS) is a widely used tool to measure burnout. The objective of this study was to compare the MBI-HSS and a two-question tool to determine burnout in the EM resident population.Methods: Based on data from the 2017 National Emergency Medicine Resident Wellness Survey study, we determined the correlation between two single-item questions with their respective MBI subscales and the full MBI-HSS. We then compared a 2-Question Summative Score to the full MBI-HSS with respect to primary, more restrictive, and more inclusive definitions of burnout previously reported in the literature.Results: Of 1,522 residents who completed the survey 37.0% reported “I feel burned out from my work,” and 47.1% reported “I have become more callous toward people since I took this job” once a week or more (each item >3 on a scale of 0-6). A 2-Question Summative Score totaling >3 correlated most closely with the primary definition of burnout (Spearman’s rho 0.65 [95% confidence interval 0.62-0.68]). Using the summative score, 77.7% of residents were identified as burned out, compared to 76.1% using the full MBI-HSS, with a sensitivity and specificity of 93.6% and 73.0%, respectively.Conclusion: An abbreviated 2-Question Summative Score correlates well with the full MBI-HSS tool in assessing EM resident physician burnout and could be considered a rapid screening tool to identify at-risk residents experiencing burnout
Distribution of Camptotheca Decaisne: Endangered Status
Camptotheca Decaisne is endemic to southern China. Since 1934, C. acuminata has been widely introduced to many gardens and arboreta in North America, Asia, and Europe as living collections. Our national surveys in China between 1995 and 1998 indicated that the genus. Camptotheca spp. are severely endangered in native range. Our field surveys failed to locate any wild populations of C. acuminata although it is often cultivated as landscape trees in southern China. We could not identify any living trees of C. acuminata var. tenuifolia and var. rotundifolia. We estimated that there are approximately 500 mature trees of C. lowreyana in Guangdong and less than 50 wild mature trees of C. yunnanensis in Yunnan
Limestone Solubility: What Can You Do About It?
Calcium (Ca) is essential for bone development mineralisation, as well as for eggshell formation, muscle and neural functions. Depending on the type of diets (veggie vs. non-veggie), species (turkey, chicken, duck), and age of animal (young vs. adult), limestone can contribute up to 95% total Ca in the final diet, with more Ca from limestone for younger animals with veggie diet. Despite the significant contribution of limestone to total diet Ca levels, the bioavailability variation of limestone Ca is rarely considered. Phosphorus (P) is a limited resource and is the third most costly ingredient in poultry diets. Improving P utilization in poultry diets will decrease the amount of inorganic P needed, reduce P excretion and feed costs, as well as increase the sustainability of poultry production. Studies in the past two decades have clearly demonstrated that Ca can be detrimental to P utilization. Some recent studies suggested that phytase, if used correctly can partially or even completely alleviate such detrimental effect. In addition, recent evidences also showed that formulating on bioavailability of Ca, instead of total Ca, could be more favourable in regard to feed cost, animal performance, and sustainability. The global limestone survey started in 2018, primarily to understand the variation of: 1) Ca concentration from the most significant Ca source and probably the cheapest ingredient limestone; 2) solubility and potentially bioavailability of the Ca from limestone. In parallel, a series animal studies were carried out to determine: 1) correlation of in vitro limestone solubility and in vitro Ca digestibility; 2) the impact of solubility profile on P digestion and phytase efficacy. It has been four years since the survey started, with over 1500 samples collected globally. It is a good time to review the results from and learnings so far
Sediment chemistry in a hydrologically restored bottomland hardwood forest in Midwestern US
The University Archives has determined that this item is of continuing value to OSU's history
Recommended from our members
Effect of Combination Folic Acid, Vitamin B6 , and Vitamin B12 Supplementation on Fracture Risk in Women: A Randomized, Controlled Trial.
Epidemiologic studies have demonstrated an association of elevated plasma homocysteine levels with greater bone resorption and fracture risk. Vitamins B12 , B6 , and folic acid are cofactors in homocysteine metabolism, and supplementation with B vitamins is effective in lowering homocysteine levels in humans. However, randomized trials of supplemental B vitamins for reduction of fracture risk have been limited. Therefore, we performed an ancillary study to the Women's Antioxidant and Folic Acid Cardiovascular Study (WAFACS), a large randomized trial of women with preexisting cardiovascular disease or three or more coronary risk factors, to test whether a daily B vitamin intervention including folic acid (2.5 mg/day), vitamin B6 (50 mg/day), and vitamin B12 (1 mg/day) reduces nonspine fracture risk over 7.3 years of treatment and follow-up. Among 4810 women, we confirmed 349 nonspine fracture cases by centralized review of medical records. In a substudy of 300 women (150 in treatment group and 150 controls) with paired plasma samples at randomization and follow-up (7.3 years later), we measured two bone turnover markers, including C-terminal cross-linking telopeptide of type I collagen (CTX) and intact type I procollagen N-propeptide (P1NP). In Cox proportional hazards models based on intention-to-treat, we found no significant effects of B vitamin supplementation on nonspine fracture risk (relative hazard = 1.08; 95% confidence interval, 0.88 to 1.34). In a nested case-cohort analysis, there were no significant effects of B vitamins on fracture risk among women with elevated plasma homocysteine levels, or low levels of vitamins B12 or B6 , or folate at baseline. Furthermore, treatment with B vitamins had no effect on change in markers of bone turnover. We found no evidence that daily supplementation with B vitamins reduces fracture risk or rates of bone metabolism in middle-aged and older women at high risk of cardiovascular disease. © 2017 American Society for Bone and Mineral Research
- …